Polymer Supplier for Resins, Reprocessed Plastic, Widespec Plastics
Polymer Distributor of Resins, Reprocessed Plastic, Widespec Plastics












Polymer Distributor of Resins, Reprocessed Plastic, Widespec Plastics

 

 

 

 Polymer Supplier for Resins, Reprocessed Plastic, Widespec Plastics

 

Select the material type below:

LDPE - Film Grade
 LLDPE - Film Grade
HDPE - HLMI Sheet Extrusion

Typical Properties Data Sheet
LDPE - Film Grade

PHYSICAL PROPERTIES ASTM METHOD VALUES (1)
ENGLISH(S1)
RESIN PROPERTIES
Melt Index, gm/10 min D 1238 2
Density, gm/cc D 792 0.921

BLOWN FILM PROPERTIES @ 1.5 MIL
Dart Impact, gm D 1709 130
Elmendorf Tear, gm   MD* D 1922 320
Tensile Yield, psi (Mpa)  MD D 882 1600 (11.0)
Ultimate Tensile, psi (Mpa) MD D 882 3950 (27.2)
Ultimate Elongation, % MD D 882 340
Gloss, 45 degrees D 2457 45
Haze, % D 1003 12.5
Coefficient of Friction D 1894  0.8
* Machine Direction

Back to Top

Plastic Resins and Reprocessed Plastic Brought to you by Jamplast

Typical Properties Data Sheet
LLDPE - Film Grade

PHYSICAL PROPERTIES

ASTM METHOD

 VAULES (1)
ENGLISH(S1)
RESIN PROPERTIES
Melt Index, gm/10 min

  D 1238

 1
Density, gm/cc D 792 0.9
Tensile Yield, psi (Mpa)  D 638 1800 (12.4)
Ultimate Tensile, psi (Mpa) D 638 3800 (26.2)
Ultimate Elongation, % D 638 1000
Vicat Softening Point, Degree F (Degree C)

D1525

 223 (106)
Peak Melting Point, 
Degree F (Degree C)		 250 (121)
BLOWN FILM PROPERTIES @ 1.5 MIL
Dart Impact, gm

D 1709

 275
Elmendorf Tear, gm           MD* D 1922 375
Tensile Yield, psi (Mpa)      MD D 882 1550 (10.7)
Ultimate Tensile, psi (Mpa) MD

D 882

 8300 (57.2)
Ultimate Elongation, %      MD D 882 550
Gloss, 45 degrees

D 2457

75
Haze, % D 1003 5
2% Secant Modulus, psi (Mpa)     MD

D 882

 26,471 (10.3)

Back to Top

Plastic Resins and Reprocessed Plastic Brought to you by Jamplast

Typical Properties Data Sheet
HDPE - HLMI Sheet Extrusion

PHYSICAL PROPERTIES ASTM METHOD VALUES (1)
ENGLISH(S1)
Melt Flow (Condition) (g/10 min) D 1248 10.00(190/21.6)
Tensile Strength @ Yield (psi) D 1248 3.80x10^3
Density (g/cm^3) D 1248 0.95
Elongation @ Break (%) D 1248 600
Flexural Modulus (psi) D 1248 1.75x10^5
Notched Izod (ft-lb/in) D 1248 0.5
Melt Temperature (degree F)                             395
FEATURES:                                              
Excellent stress cracking resist, good impact & met strength
Processing Method: Blow molding & Thermoform

Back to Top

Plastic Resins and Reprocessed Plastic Brought to you by Jamplast

 

The data listed above is accurate to the best of our knowledge. Due to the many different conditions under which this product and information may be used, there is no warranty expressed or implied. Users of this product should make their own tests to determine the suitability of these products for the intended application.

 

277 Clarkson Road    Suite 100
Ellisville, MO  63011
(636) 238-2100

Home | About Jamplast | Products | Service | Warehouse Locations
 Value-Added Services | Employment Opportunities | FAQs | Request A Quote 
Inventory Specials | Data Sheets | E-mail