 |
Typical Properties Data Sheet
Polypropylene Homopolymer - 12MFR
PHYSICAL
PROPERTIES |
ASTM
METHOD |
VALUES |
Melt
Flow (Condition) (g/10 min) |
D1238 |
12.00 (230/2.16) |
Tensile
Strength @ Yield (PSI) |
D638 |
5.30x10^3 |
Density(g/cm^3) |
D1505 |
0.9 |
Elongation
@ Yield (%) |
D638 |
14 |
Flexural
Modulus (PSI) |
D790 |
2.40x10^5 |
Notched
Izod (ft-lb/in) |
D256 |
0.5 |
Vicat
Softening Point (degrees F) |
305 |
Heat
Deflection Temperature |
D648 |
219 |
FEATURES: |
Excellent
color, process stability, low odor, good flow & set-up |
Processing Method: Injection |
Back
to Top
Typical Properties Data Sheet
Polypropylene Homopolymer - 23MFR
PHYSICAL PROPERTIES |
ASTM
METHOD |
VALUES |
Melt
Flow (Condition) (g/10 min) |
D1238 |
23.00 (230/2.16) |
Tensile
Strength @ Yield (PSI) |
D638 |
5.50x10^3 |
Density(g/cm^3) |
D1505 |
0.9 |
Elongation
@ Yield (%) |
D638 |
14 |
Flexural
Modulus (PSI) |
D790 |
2.80x10^5 |
Notched
Izod (ft-lb/in) |
D256 |
0.4 |
Vicat
Softening Point (degrees F) |
305 |
Heat
Deflection Temperature |
D648 |
235 |
FEATURES: |
Excellent
stiffness, static dissipation, fast cycle & mold release |
Processing Method: Injection |
Back
to Top
Typical
Properties Data Sheet
Polypropylene Homopolymer - 35MFR
PHYSICAL
PROPERTIES |
ASTM
METHOD |
VALUES |
Melt
Flow (Condition) (g/10 min) |
D1238 |
35.00 (230/2.16) |
Tensile
Strength @ Yield (PSI) |
D638 |
5.00x10^3 |
Density(g/cm^3) |
D1505 |
0.9 |
Elongation
@ Yield (%) |
D638 |
15 |
Flexural
Modulus (PSI) |
D790 |
1.90x10^5 |
Notched
Izod (ft-lb/in) |
D256 |
0.5 |
FEATURES: |
Good
color, process stability, flow, antistatic & low odor |
Processing Method: Injection |
Back
to Top
|
